Instructions

The scalpel is inserted into the slot in the container until the is heard. The handle is withdrawn & the blade remains sealed inside for later disposal.

Setting up the BladeFLASK and Bracket

The Qlicksmart BladeFLASK scalpel blade remover is designed for single-handed operation and comprises two components - Flask and Bracket.

Bracket:

The bracket is an integral part of the overall system and is supplied separately with instructions including a template to simplify placement.

The mounting bracket is fixed to a wall, bench or trolley at each clean-up site or point of use through a strong, adhesive, double-sided tape is pre-fixed to the rear of the bracket. Additional mounting screws are required should they be required.

Flask-diagram-bracket

BladeFLASK:

The BladeFLASK unit is then mounted onto the bracket.

To replace or remove the BladeFLASK, simply slide out the old BladeFLASK and slide in the replacement.

Flask-diagram-flask

Removing blades using BladeFLASK

The simple and safe Qlicksmart method

BFlask-step1

BFlask-step2

BFlask-step3

Place blade flat onto landing pad - Sharp Edge Right / Tang “UP”

Push scalpel handle into

BladeFLASK parallel to landing pad - Until pronounced CLICK

Remove handle - Blade contained in BladeFLASK (removes up to 100 blades)

•	Purchase/Enquiry

Scalpel blade removal can now be done in a 'click'!

"A very versatile and user-friendly device. Environmentally friendly as it eliminates the haphazard disposal of sharps. One hand operation is its unique feature seldom found in similar scalpel removal devices. A good innovative device."

Bernard Tan, Senior Medical Technologist, Histopathology Laboratory, Singapore General Hospital